Still unsure?
Refurbed products are more sustainable and up to 40% cheaper compared to a new device. Your trusted refurbed product comes with a minimum 12-month warranty and a 30-day free returns policy, with no questions asked.
1950s Perfectus made by Erich Wander around 1955.
This is an all solid archtop with a little German Carve - srpruce top and maple back & sides.
The guitar got a Rellog fretboard pickup hidden in the neck.
The neck is straight and action very comfy low.
Work done: new pickguard “GDR style” with volume pot, partial refret (first 9 frets), changed the output jack from the neck heel to the end block, now old original tuners - it had non original low budget tuners on, Stauffer neck bushing was epoxid in (only the bushing, not the neck) and the whole neck heel reeinforced - the neck can be taken off with a 4mm square key, the cable to the vol pot got a plug so you can disattach the neck with the pickup, the Rellog in the fretboard was dead and was rewound to about 4,3k Ohm, the binding was reglued and patched in some places.
Specs: Nut width: 45 mmAction (low E string at 12th fret): 1,9 mm - 0.10 stringsWeight: 2,57 kgScale: 640 mmBody width: 42,6 cmBody depth: 8 cm
The guitar comes in the original “beaten” hardcase.
Every refurbed device is refurbished in up to 40 steps — taking it from used to like new again. Here are 5 key steps:
1. Supplier buys pre-loved tech
2. Data cleanse
3. Swap of faulty parts
4. External preparation
5. Sold via refurbed
Sign up for our newsletter!
Never miss an offer again.
Information about the use of personal data can be found in our Privacy policy.
Confirm sign-up
Almost done: We’ve sent you a confirmation email